SICK MLG-2 ProNet - Start Simulation

Figure 142: Add simulation object
►
Select the object shape.
Figure 143: Determine the shape of the simulation object
►
Enter the height, width, and length in mm. Enter the object speed in m/s.
Figure 144: Determine the size of the simulation object
►
Click Start simulation.
8
CONFIGURATION WITH SOPAS ET
146
O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet 8018748.1Q3I/2024-12-18 | SICK
Subject to change without notice