SICK MLG-2 ProNet - Page 159

Required overcurrent protection when
using the following wire gages
•
AWG 20/0.52mm
2
•
AWG 22/0.32mm
2
•
AWG 24/0.20mm
2
•
AWG 26/0.13mm
2
•
AWG 28/0.08mm
2
•
AWG 30/0.05mm
2
•
5A
•
3A
•
2A
•
1A
•
0.8A
•
0.5A
Ethernet interface
Table 128: Fieldbus module data sheet – Ethernet interface
Data transmission rate 100Mbit/s
Default IP address 192.168.200.100
Subnet mask 255.255.255.0
Protocol TCP/IP
Maximum length of cable According to IEE802.3 (typ. 100m)
Table 129: MLG-2 data sheet - network services and ports
Use Protocol Source Source
port
Destination Destination
port
SOPAS Commu‐
nication (Config‐
uration and
Diagnostics)
TCP Client, e.g.
computer with
SOPAS ET
2122 MLG-2 Pro/
ProNet
2122
MLG-2 Pro/
ProNet
2122 Client, e.g.
computer with
SOPAS ET
2122
SOPAS Scan
(Device search)
UDP Computer with
SOPAS ET
30718 MLG-2 Pro/
ProNet
30718
MLG-2 Pro/
ProNet
30718 Computer with
SOPAS ET
30718
PROFIBUS interface
Table 130: Fieldbus module data sheet - PROFIBUS interface
Data transmission rate Autobaud, 9,600kbit/s to 12Mbit/s
TECHNICAL DATA 12
8018748.1Q3I/2024-12-18 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet
159
Subject to change without notice