Table 21: Available process data
Name Function Available for
SOPAS ET Fieldbus
NBB Number of beams blocked
Total number of beams blocked (e.g., for
object detection)
C C
NBM Number of beams made
Total number of beams made (e.g., for hole
detection)
C C
NCBB Number of consecutive beams blocked (e.g.,
for object detection).
If there are multiple objects in the detection
area, the greatest number of consecutive
beams blocked is displayed.
C C
NCBM Number of consecutive beams made (e.g.,
for hole detection).
If there are multiple gaps in the detection
area, the greatest number of consecutive
beams made is displayed.
C C
LBB Last beam blocked
Beam number of the last beam blocked (e.g.,
for object height measurement)
C C
LBM Last beam made
Beam number of the last beam made
C C
FBB First beam blocked
Beam number of the first beam blocked
(e.g., for height classification of a hanging
object)
C C
FBM First beam made
Beam number of the first beam made
C C
ODI Outside dimension
Total number of beams between the first and
last beams blocked (e.g., for measuring the
outside dimension)
C C
IDI Inside dimension
Total number of beams made between the
first and last beams blocked (e.g., for meas‐
uring the inside dimension)
C C
CBB Central beam blocked
Beam number of the central beam blocked
(e.g., for measuring an object position)
C C
CBM Central beam made
Beam number of the central beam made
(e.g., for measuring a hole position)
C C
NBB Zone X
(X = 1,2, 3 or 4)
Number of beams blocked in the indicated
zone
Total number of beams blocked (e.g., for
object detection)
C C
NCBB Zone X
(X = 1,2, 3 or 4)
Number of consecutive beams blocked (e.g.,
for object detection) in the indicated zone.
If there are multiple objects in the detection
area, the greatest number of consecutive
beams blocked is displayed.
C C
PRODUCT DESCRIPTION 3
8018748.1Q3I/2024-12-18 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet
29
Subject to change without notice
To Next Page
Loading...
