Name Function Available for
SOPAS ET Fieldbus
FBB Zone X
(X = 1,2, 3 or 4)
First beam blocked in the indicated zone
Beam number of the first beam blocked
(e.g., for height classification of a hanging
object)
C C
LBB Zone X
(X = 1,2, 3 or 4)
Last beam blocked in the indicated zone
Beam number of the last beam blocked (e.g.,
for object height measurement)
C C
CBB Zone X
(X = 1,2, 3 or 4)
Central beam blocked in the indicated zone
Beam number of the central beam blocked
(e.g., for measuring an object position)
C C
RLC1 … 16 Run-length code
Outputs the value of the relevant change
C C
Beam status Beam status
Outputs the value of each individual beam
C C
QS Status of the switching output
C C
SYS System status
Consists of several status messages
C C
QoR Process quality
Shows the quality of the light level currently
being received
C C
QoT Teach-in quality
Shows the quality after the teach-in
C C
Control Used for control –
C
3.10 Display and operating elements
3.10.1 Sender
The sender has three LEDs on its front. The LEDs are located on the connection side.
The section LED indicators and error indicators on page 153 explains the meaning of
the LED indicators.
3 PRODUCT DESCRIPTION
30
O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet 8018748.1Q3I/2024-12-18 | SICK
Subject to change without notice
To Next Page
Loading...
