Figure 20: LEDs on the fieldbus module
1
POWER
2
STATUS
3
LINK/ACT
DIP switches
Eight DIP switches are located under a cover in the fieldbus module. With these
switches, you can make settings for the respective fieldbus.
Figure 21: DIP switch on the fieldbus module
1
DIP switches
3.11 Application examples
3.11.1 Application examples for the MLG2
The MLG-2 is suitable for complex applications including e.g. start and end detection,
detection of small or transparent objects, traffic applications, volume measurement, or
contour measurement.
PRODUCT DESCRIPTION 3
8018748.1Q3I/2024-12-18 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet
33
Subject to change without notice
To Next Page
Loading...
