SICK MLG-2 ProNet - Mounting; Scope of Delivery; Recommended Mounting Arrangements; Mounting with Light in Opposite Directions

4 Mounting
4.1 Scope of delivery
1 × sender
1 × receiver
4/6 x QuickFix brackets
2)
1 x mounting bracket for the fieldbus module
1 × Quick Start Guide
4.2
Recommended mounting arrangements
When several MLG-2s are mounted close to one another, there is a risk of mutual
interference. This is particularly likely if there are shiny surfaces nearby or if the objects
being detected are shiny.
Therefore, when mounting two MLG-2s close to one another, their light beams should
be oriented in opposite directions.
4.2.1 Mounting with light in opposite directions
Figure 28: Placement with light in opposite directions
2)
6 x FlexFix brackets for monitoring heights above 2m.
MOUNTING 4
8018748.1Q3I/2024-12-18 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet
35
Subject to change without notice