SICK MLG-2 ProNet - Turning the Fieldbus Module on the MLG-2

1
2
Figure 39: Mounting bracket for the fieldbus module
1
FlexFix bracket
2
Mounting bracket
1. Use the M5 x 6 screw provided to fasten the mounting bracket on the fieldbus
module.
2. Use an M5 screw with a sliding nut, for example, to mount the mounting bracket
on an industrial profile.
4.3.3 Turning the fieldbus module on the MLG-2
All connections of the fieldbus module are provided on one side. You can mount the
fieldbus module rotated by 180° so you can feed the cables in from the front or the
back.
MOUNTING 4
8018748.1Q3I/2024-12-18 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet
45
Subject to change without notice