SICK MLG-2 ProNet - Page 46

1 2
Figure 40: Mounting directions of the fieldbus module
1
Mounting with the connections to the front side
2
Mounting with the connections to the rear side
1
2
3
5
4
Figure 41: Turn the fieldbus module by 180°
1
Unscrew the Torx T20 mounting screw
2
Pull the fieldbus module downwards and away
3
Turn the fieldbus module by 180°
4
Insert the fieldbus module again
5
Tighten the mounting screw
4 MOUNTING
46
O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet 8018748.1Q3I/2024-12-18 | SICK
Subject to change without notice