Three-part interface
Figure 73: SOPAS ET interface
The left-hand side of the graphical interface provides information on the system boun‐
daries, the status and the interfaces of the connected MLG-2.
In the center , the light grid is shown in a simulation with its light beams.
The right-hand side of the interface lists the available options in expandable menus.
8.2.1.1 System boundaries and status
System boundaries
Figure 74: Display of the system boundaries
Under “System boundaries”, SOPAS ET displays the reproducibility, minimum presence
time, and response time (see "Scan time", page 17).
SOPAS ET displays the maximum recommended sensing range with which the MLG-2
can be safely operated.
8
CONFIGURATION WITH SOPAS ET
96
O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet 8018748.1Q3I/2024-12-18 | SICK
Subject to change without notice
To Next Page
Loading...
