•
The current values for the beam functions (see "Beam functions", page 150)
•
The current values for the run-length code
Figure 77: Basic functions and status of the output
Status inputs/outputs
Under Status inputs/outputs, SOPAS ET shows the status of the switching output.
Next to the indicator, you will find the function configured for the output.
8.2.1.3 Representation of the detection area
Figure 78: Detection area – Simulation
8 CONFIGURATION WITH SOPAS ET
98
O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet 8018748.1Q3I/2024-12-18 | SICK
Subject to change without notice
To Next Page
Loading...
