SICUREZZA COMPAGNIE RIUNITE
2.4 - RETENTION SYSTEM ADJUSTMENT
2.4.a - First use
Chin-strap:
- Adjust in height as described in Chapter
2.2.
- Put on the hardhat.
- Adjust the size
(as described in Chapter 2.3)
- Fasten the buckle.
- Slide the adjustment strap (1) in the
adjustment crosspiece of the system
(2).
- Again pull the strap (1) so that the sys-
tem adjusts correctly.
- Should you be unable to achieve the
correct adjustment, act on the adjusters
(point 3) positioned on either side of the
chin-strap and lengthen or shorten the
strap as shown in the image.
2.4.b - Regular use
Chin-strap:
- Fasten the chin-strap with the buckle.
Size and anti-creep adjustment:
- Adjust as described in Chapter 2.3.