Installation and operating instructions MHS400 smart
05.2017 55
21. EC declaration of incorporation
Manufacturer SIEGENIA-AUBI KG
Hardware and ventilation technology
Duisburger Straße 8
57234 Wilnsdorf
declares that the product:
HS drive
Device type
MHS400 smart
Type designation
meets the following fundamental requirements:
EC Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
EN 301 489-1
EN 301 489-17
Low voltage directive 2014/35/EU
EN 60335-1:2012
EN 60335-2-103:2010
RoHS Directive 2011/65/EU
This declaration is based on test reports from:
EMC TestHaus Dr. Schreiber GmbH - Test protocol 14/457
The machine may only be put into operation when incomplete if it has been ascertained, if applicable, that the machine into
which it is to be installed conforms to the specifications of the Machinery Directive.
The specific technical documentation has been drafted in accordance with Annex VII Part B of the EC Machinery Directive
2006/42/EC.
We undertake to provide such documentation to market surveillance authorities in electronic format within a reasonable
time upon reasoned request. The aforementioned technical documentation can be obtained from the manufacturer.
Siegen, 09-05-2017
This declaration certifies conformity with the directives cited but does not warrant properties in the legal sense.
The safety instructions in the product documentation supplied must be followed.
To Next Page
Loading...
General