Siemens 5WG1 372-5EY01 - Cancellation of the Whole Priority Program

54
11.5 Cancel Everything
Illustration 1: Menu selection ? and display of free memory locations e.g. 304
Illustration 2: Cancel program, press Button CL
Illustration 3: Cancel everything, press Button 0
Discontinue cancellation, press CL Button again
Illustration 4: Confirm cancellation, press Enter Button
Illustration 5: Display 324 memory locations, all switching times are cancelled
With Button v back into the automatic program (Auto)
Select
Everything
Cancel
Confirm
Cancellation
11.3 Cancellation of the Whole Priority Program
11.4 Complete Program Cancellation of One Channel
The program of one channel can be cancelled completely.
The cancellation is effected as described in Chapter 11.3. The entry step in
Illustration 4 (Button 1) must be omitted in this case.
4)
Illustration 1: Menu selection ? and display of free memory locations e.g. 304
Illustration 2: Initiate the cancellation procedure, press CL Button
Illustration 3: Select channel e.g. C1, press Button 1
Illustration 4: Select the priority program for cancellation e.g. P1, press Button 1
Discontinue cancellation procedure, press CL Button again
Illustration 5: Confirm cancellation procedure, press Enter Button
Additional cancellation as described, or
with Button back into the automatic
program (Auto) v.
Select
Channel 1
Cancel
Priority 1
Confirm
Cancellation