Siemens 6AV2128-3GB06-0AX0 - Language, Region and Formats; Date and Time

Operating the Control Panel
5.8 Language, Region and Formats
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA
101
5.8 Language, Region and Formats
5.8.1 Date and time
Under "Date and time", set the date, time, and time zone for the HMI device manually or via
a time server on the network.
NOTICE
Time synchronization required for time-dependent reactions
A malfunction may occur in the plant if the date and time are not synchronized and time-
dependent reactions are triggered in the plant via the HMI device. To avoid malfunctions,
use automatic time synchronization via one or more NTP servers.
Date and Time
● "Date": Display field with the current date.
● "Current time": Display field with the current clock time.
● "Time zone": Selection list for the desired time zone.