Siemens 6AV2128-3GB06-0AX0 - Page 159

Technical information
8.8 Technical specifications
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA
159
Interfaces
Unified Comfort HMI device
MTP1500
MTP1900
MTP2200
RS 422/485
1 x SUB-D
PROFINET (LAN) 2 x RJ45 10/100 Mbps
1
1 x RJ45 10/100/1000 Mbps
USB 3.1 4 x Host
2
1
With integrated switch (one IP address only)
2
USB Type A; maximum load per interface: 900 mA; maximum total load of all interfaces: 1.2 A
Power supply
Unified Comfort HMI device
MTP1500
MTP1900
MTP2200
Rated voltage
24 V DC
Permitted voltage range
+19.2 V ... +28.8 V
Mains and voltage buffering time
20 ms
Rated current at 24 V DC, without loads
0.7 A
1.2 A
1.0 A
Rated current, load-dependent
0.7 ... 1.3 A
1.2 A ... 1.7 A
1.0 ... 1.5 A
Power consumption, without loads
1
16.8 W
28.8 W
24.0 W
Inrush current I
2
t
0.5 A
2
s
Maximum permitted transient
35 V (500 ms)
Minimum time between two transients
50 s
Internal protection
Yes
1
The power loss generally corresponds to the specified value for power consumption.
The current and power specifications apply without a high permanent processor load by apps.
Miscellaneous
Unified Comfort HMI device
MTP1500
MTP1900
MTP2200
Buffered real-time clock
1
Yes
Audio reproduction
Integrated buzzer
1
Buffering time typically 6 weeks