Mounting and connecting the device
3.3 Installing a strain relief
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA
39
HMI devices with display diagonal ≤ 12"
Fasten the strain relief plate to the device with a torque of 0.8 Nm using the two screws
supplied.
The figure below shows the installation using the MTP700 Unified Comfort HMI device as an
example.
HMI devices with display diagonal ≥ 15"
Fasten the strain relief plate to the device with a torque of 0.8 Nm using the two screws
supplied.
The figure below shows the installation using the MTP1900 Unified Comfort HMI device as
an example.
To Next Page
Loading...
