Mounting and connecting the device
3.4 Connecting the device
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA
51
3.4.7 Connecting a printer
Wiring diagram
The following figure shows how to connect the HMI device to a printer with a Unified Comfort
Panel with display diagonal ≥15" as an example.
Note when connecting
Note
Cables for data exchange
If you use cables without a metallic netting shield between the HMI device and printer, you
may experience
functional problems.
-braided shielding grounded at both ends only for connecting the HMI
Note
Some printers may require that you also set the ASCII character set used in the project on
the printer.
Observe the supplied printer documentation when you connect the printer.
To Next Page
Loading...
