Device maintenance and repair
7.4 Spare parts and repairs
Unified Comfort Panels
138 Operating Instructions, 03/2020, A5E46641217-AA
7.4 Spare parts and repairs
Repairs
In case of repair, the device must be shipped to the Return Center in Erlangen. Only repair
by the Return Center in Erlangen is permitted.
Depending on the work necessary to repair the device, the Center may decide to give you a
credit. A credit is only granted when the sender ordered a new HMI device.
The address is:
Siemens AG
Digital Industries
Retouren-Center
c/o Geis Service GmbH, Tor 1-4
Kraftwerkstraße 25a
91056 Erlangen
Germany
Spare parts
Spare parts and accessories for the HMI device can be found in section Accessories
(Page 16).
7.5 Recycling and disposal
Due to the low levels of pollutants in the HMI devices described in these operating
instructions, they can be recycled.
Contact a certified disposal service company for electronic scrap for environmentally sound
recycling and disposal of your old devices, and dispose of the device according to the
relevant regulations in your country.
To Next Page
Loading...
