03/2013 3 Setting up functions
3.6 Copy
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
3-191
3.6 Copy
3.6.1 Copy function settings
Function description
This copy function fetches from a so-called source machine the configurations that
the user has created previously and copies them to the current machine, the target
machine.
Single or several user functions can be copied concurrently or successively. Any
source machine for which the user has access can be selected for copying.
Fig. 3-73: Copy functions
Operating concept
The +/− fields can be used to list or hide individual user configurations that belong
to the configuration group.
Fig. 3-74: Selecting a source machine
To Next Page
Loading...
Need help?
General
