4.2.2 Checking shock and tilt indicators
The purpose of shock and tilt indicators
The unit is equipped with shock and tilt indicators to monitor for damage during transit. It is
essential that you check the shock and tilt indicators before commissioning the unit.
WARNING
Danger to life as a result of unsafe operation
Safe operation of the device is not guaranteed if the shock or tilt indicator has tripped
(responded)
This can result in death, serious injury or material damage.
● If one of the indicators has tripped, do not perform any commissioning.
● Inform the Technical Support. Only specialist Siemens technicians can recommend
appropriate measures.
See also
Service & Support (Page 173)
Preparations for use
4.2 Inspections when receiving the delivery
SINAMICS SM150 6SL3845-7NN46-7AA2
60 Operating Instructions Rev.201910281345 EXAMPLE
To Next Page
Loading...