4.4 Remote installation
4.4.1
At sensor
1. Remove terminal box lid.
2. Mount the two terminal blocks as shown and insert electrode cable plug ① (terminals 85
and 86) and coil cable plug ② (terminals 82, 0 and 83).
3. Remove
SENSORPROM (to be mounted in transmitter terminal box). Ensure that the serial
no. on the SENSORPROM label is identical to the sensor serial no.
Installing/Mounting
4.4 Remote installation
SITRANS FM MAG 5000/6000 IP67
26 Operating Instructions, 12/2019, A5E02338368-AD
To Next Page
Loading...
