Siemens 7ME6910 - Current Output Menu Diagram; Digital Output - Pulse Menu Diagram

B.3 Current output


*


Current output
Unidirectional
Unidirectional
Bidirectional
Current output
Off
Current output
Time const.
Current output
Alarm
On
Off
Current output
Current output
Alarm level: Low
Low
High
Current output
Alarm diff: No
No
Yes

Alarm
1) If HART communication is installed, it is not possible to set the output for 0-20 mA (even though
the
option is visible in the display). This is due to the fact that HART does not work if the output
falls below 2-3 mA.
2) 4-20 mA + Alarm is the default setting for MAG 6000 I. For all other variants, the default setting
is 4-20 mA.
3) For MAG 6000 I only: The controlling of alarm levels does not recognize if the jumper is mounted
for passive output. Do not combine differentiation and low alarm level together with passive
output.
The output will try to pull down the level to 1.3 mA at fatal errors which is not possible for
passive output.
B.4 Digital output - pulse
*
'LJLWDORXWSXW
3XOVH
3XOVH
)UHTXHQF\

2II
9ROXPHSXOVH
3XOVHRXWSXW
8QLGLUHFWLRQDO
8QLGLUHFWLRQDO
%LGLUHFWLRQDO
3XOVHZLGWK
3XOVHRXWSXW
WLPHFRQVW
3XOVHSRODULW\
3RVLWLYH
3RVLWLYH
1HJDWLYH
P

PO
O
K
O
0O
IW

LQ

86*
86N*
%%/
%%/
8.*
8.0*
"
Menu diagrams
B.4 Digital output - pulse
SITRANS FM MAG 5000/6000 IP67
Operating Instructions, 12/2019, A5E02338368-AD 83