Remote operation
7.2 Operating via AMS Device Manager
SITRANS LR250 with mA/HART
Operating Instructions, 10/2019, A5E32220602-AG
99
Calibration [see Calibration (2.3.)]
● Low Calibration Point
● High Calibration Point
● Sensor Offset
Rate [see Rate (2.4.)]
● Response Rate
● Fill Rate per Minute
● Empty Rate per Minute
Fail-safe [see Fail-safe (2.5.)]
● Material level
● Timer
● Level
Analog Output Scale
Navigate to Configure/Setup > Setup and click on Analog Output Scaling for access to:
Analog Output Scaling [see
Analog Output Scaling (2.6.)]
● Current Output Function
● 4 mA Setpoint
● 20 mA Setpoint
● Minimum mA Limit
● Maximum mA Limit
To Next Page
Loading...
