Siemens 7SJ82 - Page 1611

Light-Emitting Diodes
Table A-10 Default LED Displays, Using the Example of Overcurrent Protection
LEDs Signal Number Signal Type Configura-
tion
LED1 VI 3ph 1:Group indicat.:Pickup:phs A SPS NT
LED2 VI 3ph 1:Group indicat.:Pickup:phs B SPS NT
LED3 VI 3ph 1:Group indicat.:Pickup:phs C SPS NT
LED4 VI 3ph 1:Group indicat.:Pickup:phs gnd SPS NT
LED5 Circuit breaker 1:Circuit break.:Trip/
open cmd.
201.4261.300 SPS L
LED15 Alarm handling:Group warning 5971.301 SPS U
LED16 Device:Process mode inactive SPS U
Appendix
A.10 Prerouting 7SJ82/85 General
SIPROTEC 5, Overcurrent Protection, Manual 1611
C53000-G5040-C017-8, Edition 07.2017