Addr. Parameter C Setting Options Default Setting
_:6271:7 Power P< 1:Dropout delay 0.00 s to 60.00 s 0.00 s
_:6271:6 Power P< 1:Operate delay 0.00 s to 60.00 s 1.00 s
Power Q> 1
_:6301:1 Power Q> 1:Mode
•
off
•
on
•
test
off
_:6301:2 Power Q> 1:Operate &
flt.rec. blocked
•
no
•
yes
no
_:6301:105 Power Q> 1:Measured
value
•
power of phase A
•
power of phase B
•
power of phase C
•
positive seq. power
positive seq.
power
_:6301:3 Power Q> 1:Threshold -200.0 % to 200.0 % 70.0 %
_:6301:101 Power Q> 1:Dropout ratio 0.90 to 0.99 0.95
_:6301:103 Power Q> 1:Tilt power
characteristic
-89.0 ° to 89.0 ° 0.0 °
_:6301:7 Power Q> 1:Dropout delay 0.00 s to 60.00 s 0.00 s
_:6301:6 Power Q> 1:Operate delay 0.00 s to 60.00 s 1.00 s
Power Q< 1
_:6331:1 Power Q< 1:Mode
•
off
•
on
•
test
off
_:6331:2 Power Q< 1:Operate &
flt.rec. blocked
•
no
•
yes
no
_:6331:105 Power Q< 1:Measured
value
•
power of phase A
•
power of phase B
•
power of phase C
•
positive seq. power
positive seq.
power
_:6331:3 Power Q< 1:Threshold -200.0 % to 200.0 % -30.0 %
_:6331:101 Power Q< 1:Dropout ratio 0.90 to 0.99 0.95
_:6331:103 Power Q< 1:Tilt power
characteristic
-89.0 ° to 89.0 ° 0.0 °
_:6331:7 Power Q< 1:Dropout delay 0.00 s to 60.00 s 0.00 s
_:6331:6 Power Q< 1:Operate delay 0.00 s to 60.00 s 1.00 s
Information List
No.
Information Data Class
(Type)
Type
Power P> 1
_:6241:81 Power P> 1:>Block stage SPS I
_:6241:54 Power P> 1:Inactive SPS O
_:6241:52 Power P> 1:Behavior ENS O
_:6241:53 Power P> 1:Health ENS O
_:6241:55 Power P> 1:Pickup ACD O
_:6241:56 Power P> 1:Operate delay expired ACT O
_:6241:57 Power P> 1:Operate ACT O
Power P< 1
_:6271:81 Power P< 1:>Block stage SPS I
6.37.9
Protection and Automation Functions
6.37 Power Protection (P,Q), 3-Phase
SIPROTEC 5, Overcurrent Protection, Manual 807
C53000-G5040-C017-8, Edition 07.2017
To Next Page
Loading...
