[sccb_3pol, 1, en_US]
Figure 11-7 Circuit-Breaker Test in the Test Suite in DIGSI
²
Select the function in the project tree on the left in the online access.
²
Start the desired test program in the upper portion of the working area.
²
The corresponding feedback is displayed in the bottom portion of the working area. Additional informa-
tion about the behavior of other functions while the circuit-breaker test is being performed can be read in
the operational log.
Functional Tests
11.6 Circuit-Breaker Test
1384 SIPROTEC 5, Overcurrent Protection, Manual
C53000-G5040-C017-8, Edition 07.2017
To Next Page
Loading...
