12.35 Overvoltage Protection with Negative-Sequence Voltage/Positive-Sequence Voltage 1517
12.36 Undervoltage Protection with 3-Phase Voltage 1518
12.37 Undervoltage Protection with Positive-Sequence Voltage 1521
12.38 Undervoltage Protection with Any Voltage 1522
12.39 Overfrequency Protection 1523
12.40 Underfrequency Protection 1524
12.41 Underfrequency Load Shedding 1525
12.42 Rate of Frequency Change Protection 1527
12.43 Vector-Jump Protection 1529
12.44 3-Phase Power Protection (P,Q) 1530
12.45 Reverse-Power Protection 1531
12.46 Overexcitation Protection 1532
12.47 Undervoltage-Controlled Reactive-Power Protection 1534
12.48 Circuit-Breaker Failure Protection 1536
12.49 Circuit-Breaker Restrike Protection 1538
12.50 Restricted Ground-Fault Protection 1539
12.51 External Trip Initiation 1541
12.52 Automatic Reclosing 1542
12.53 Fault Locator 1543
12.54 Temperature Supervision 1544
12.55 Current-Jump Detection 1545
12.56 Voltage-Jump Detection 1546
12.57 Synchronization Function 1547
12.58 Voltage Controller 1550
12.59 Current-Balance Supervision 1553
12.60 Voltage-Balance Supervision 1554
12.61 Current-Sum Supervision 1555
12.62 Voltage-Sum Supervision 1556
12.63 Current Phase-Rotation Supervision 1557
12.64 Voltage Phase-Rotation Supervision 1558
12.65 Voltage-Comparison Supervision 1559
12.66 Trip-Circuit Supervision 1560
12.67 Analog Channel Supervision via Fast Current Sum 1561
12.68 Measuring-Voltage Failure Detection 1562
12.69 Voltage-Transformer Circuit Breaker 1564
12.70 Operational Measured Values and Statistical Values 1565
12.71 Energy Values 1569
12.72 Phasor Measurement Unit 1570
12.73 Circuit-Breaker Wear Monitoring 1571
12.74 CFC 1572
Technical Data
1406 SIPROTEC 5, Overcurrent Protection, Manual
C53000-G5040-C017-8, Edition 07.2017
To Next Page
Loading...
