Overview
The Global DIGSI 5 library provides application templates for the applications of the devices. The application
template
•
Supports the fast realization of complete protection solutions for applications
•
Contains the basic configuration for the use case
•
Contains functions and default settings for the use case
When using an application template, please note the following:
•
Adapt the application template to your specific use (check/adapt default settings, delete/add functions).
You can find more detailed information in the 2.1 Function Embedding in the Device.
•
Check the routing of binary outputs with respect to fast and normal relays.
•
Check the CFC charts for the group-warning indications and group-fault indications.
The following describes the application templates and maximum functional scope for the devices shown in
this manual.
NOTE
The availability of certain settings and setting options depends on the device type and the functions avail-
able on the device!
4.1
Applications
4.1 Overview
188 SIPROTEC 5, Overcurrent Protection, Manual
C53000-G5040-C017-8, Edition 07.2017
To Next Page
Loading...
