Siemens 7SR51 - Settings Menu

Settings Menu
Binary Inputs > Input Matrix
Parameter Range Default Setting Setting
Inhibit <Fnct Name> BI 1 to BI n
V1 to Vn
Ext Trig 60VTS
Ext Reset 60VTS
50BF-n CB Faulty
50BF-n Mech Trip
50BF-n Ext Trip
CB n Open
CB n Closed
Open CB n
Inhibit CB n Open
Close CB n
Inhibit CB n Close
74TCS-n
74CCS-n
Reset CB n Total Trip
Reset CB n Delta Trip
Trigger I
2
t CB n Wear
Reset CB n Trip Time
79 Trip & Reclose
79 Trip & Lockout
79 Ext Trip
79 Lockout
79 Reset Lockout
79 SOTF
79 Block Reclose
General Alarm n
Reset Demand
Out of Service Mode
Local Mode
Remote Mode
Local or Remote Mode
E/F Out
E/F In
Trigger Waveform Rec
Trig Trip Contacts
Trigger Fault Rec
Select Group n
Clock Sync.
Reset LEDs & O/Ps
Reset AFD Counters
AFD Zone ‘n’ Flash
50SOTF
3.4.5
Device Functionality
3.4 Binary Inputs
74 Reyrolle 7SR5, Overcurrent Protection Device, Device Manual
C53000-G7040-C014-1, Edition 11.2019