Maintenance and fault tracing7SV512
V1
110
C53000---G1176---C91
Removing the basic module:
--- Loosen the basic module using the pulling
aids provided at the top and bottom,
--- Push releasing lever fully to the right,
--- Insert module,
--- Firmly push in the module using the
releasing lever.
Inserting the basic module:
--- Pull out basic module and place onto con-
ductive surface.
View from above onto the 1/3 size
draw-out module of with releasing
lever
Figure 7.3 Aid for removing and inserting basic module
To Next Page
Loading...
