Technical data7SV512
V1
19C53000---G1176---C91
3.1.3 Mechanical stress tests
Vibration and shock during operation
Standards: IEC 60255---21
and IEC 68---2
--- Vibration sinusoidal
IEC 60255---21---1, class 1 10 Hz to 60 Hz: + 0.035 mm amplitude;
IEC 68---2---6 60 Hz to 150 Hz: 0.5 g acceleration
sweep rate 1 octave/min
20 cycles in 3 orthogonal axes
--- Shock half sine
IEC 60255---21---2, class 1 acceleration 5 g, duration 11 ms, 3 shocks in
each direction of 3 orthogonal axes
--- Seismic vibration sinusoidal
IEC 60255---21---3, class 1 1 Hz to 8 Hz: + 3.5 mm amplitude (hor. axis)
IEC 68---3---3 1 Hz to 8 Hz: + 1.5 mm amplitude (vert. axis)
8 Hz to 35 Hz: 1 g acceleration (hor. axis)
8 Hz to 35 Hz: 0.5 g acceleration (vert. axis)
sweep rate 1 octave/min
1 cycle in 3 orthogonal axes
Vibration and shock during transport
Standards: IEC 60255---21
and IEC 68---2
--- Vibration sinusoidal
IEC 60255---21---1, class 2 5 Hz to 8 Hz: + 7.5 mm amplitude;
IEC 68---2---6 8 Hz to 150 Hz: 2 g acceleration
sweep rate 1 octave/min
20 cycles in 3 orthogonal axes
--- Shock half sine
IEC 60255---21---2, class 1 acceleration 15 g, duration 11 ms, 3 shocks in
IEC 68---2---27 each direction of 3 orthogonal axes
--- Continuous shock half sine
IEC 60255---21---2, class 1 acceleration 10 g, duration 16 ms, 1000 shocks
IEC 68---2---29 each direction of 3 orthogonal axes
To Next Page
Loading...
