Siemens 9410RC - Accessing the Meter’s Webpages for Data Viewing and Meter Configuration

9410 series Meter webpages
Main menu Webpage menu Webpage content
Monitoring Instantaneous Readings • Basic readings
• Energy readings
• Demand readings
• Voltage readings
• Power Quality
Trending & Forecasting Select the target and interval for trending and forecasting and view the
results.
Power Quality Summary • Harmonics
• ITI (CBEMA)-SEMI
• NEMA Motor Derating Curve
• EN50160
Inputs/Outputs • Digital inputs
• Digital outputs
• Analog inputs
• Analog outputs
Control Resets Perform resets, and view when previous resets were performed.
Diagnostics Statistics • Communications
• Ethernet
• Serial port
• Meter - Basic
• Meter - Advanced
Phasor diagram View the phasor diagram and numeric values.
Setup Ethernet • Basic Settings
• Advanced settings
Serial Port • Basic Settings
• Advanced settings
SNMP Parameters Configure your meter’s SNMP parameters.
NTP Configure your meter’s NTP parameters.
SMTP Configure your meter’s SMTP parameters.
Date & Time Configure your meter’s time and time synchronization.
Preferences Enter your meter’s nameplate information.
Metering Configure the parameters that impact metered data.
Maintenance
1
—
Custom. No default content.
1
By default the Maintenance menu is empty, and the menu is not displayed until information is added to it.
Accessing the meter’s webpages for data viewing and meter
configuration
You can access the meter’s webpages through the meter’s Ethernet connection using
a web browser.
You must have cookies enabled in order to access your meter’s webpages.
You must configure your meter’s security settings in order to view webpages and
configure your meter using webpages.
On a hardware-locked meter you cannot add, delete or modify any webpage files.
90 7EN05-0336-01