Siemens A50 - Group

21
STEP 5:
Slot in the battery at a 45° angle, so that the groove on the edge of the battery fits well into the
guiding groove on the back housing of the phone as illustrated in PHOTO 2.18 & 2.19
PHOTO 2.18 Assembly A50– STEP 5 PHOTO 2.19 Assembly A50– STEP 5
STEP 6:
Slide the External Back Housing onto the phone and lock it down in place. PHOTO 2.20
PHOTO 2.20 Assembly A50– STEP 6
All contact pins must not be dirty, damaged or
bent! ALL CATCHES MUST ENGAGE
COMPLETELY!
If any part is not O.K please replace it with a
new part.