© 2008 Siemens Energy & Automation, Inc. All Rights Reserved
ACCESS 9340 and 9360 Meters PMCM-9340D-0208
Appendix C—EN50160 Evaluation 2/2008
EN–220
As illustrated in Table C–1 above, the EN50160 evaluations
performed by the ACCESS 9360 can be divided into two categories.
The first category performs evaluations during normal operation
utilizing meter data. The second category performs evaluations
during abnormal operation utilizing disturbance alarms.
The standard sets limits for most of the evaluations. These limits are
built into the ACCESS 9360 firmware. You can configure registers for
other evaluations and change them from the default values.
To Next Page
Loading...
