ACUSON P300™ Ultrasound System Quick Reference Guide
Page | 14
© Siemens 2012. All rights reserved.
*The ACUSON P300 System is not commercially available.
Due to regulatory reasons its future availability cannot be guaranteed.
PREVIEW to preview printed report
PAGE to scroll between report pages
MEASURE to scroll between measurements within one page
CONFIG to configure descriptions and labels within current report only
To delete measurements within the report, scroll to desired measurement (measurement
will be framed in yellow), rotate S wheel to CLEAR and press S button
To hide measurements from the printed report, scroll to the desired measurement and
press the Right Select. The measurement will now be highlighted in black
To access descriptor drop-down menus, scroll to drop-down menu and make selection
To add free text to a report, scroll to text box and type desired text
Import Images into the Report
From live imaging screen, Press EXAM/REV
Scroll to thumbnails on the right hand side of the screen
Press the Right Select on desired image
Rotate S wheel to ATTACH and press the S button
An “A” will display in the lower left hand corner
Delete Images from the Report
Press REPORT
Rotate S wheel to PAGE and press the S button
Rotate until attached images are displayed
Scroll trackball to desired image and press the Right Select, image will be framed in red
Rotate S wheel to DELETE and press S button
Text and Pictograms
Text and Pictograms can be entered on both real-time and archived images/clips.
Enter Text
Press any alphanumeric key on the QWERTY keyboard to begin inputting text
Type the annotation and press the Right Select to set (white) or press Enter to auto-
complete when desired word is displayed
or
Press OPTIONS and select ANNOTATIONS
A pre-defined set of annotations will appear
To Next Page
Loading...
