Siemens ADVIA 1800 - Sample Log window; Test Result Monitor window

42 ADVIA 1800 Operator’s Guide
Workorders can be created at your host computer or at the chemistry system.
Perform any of the following tasks at this window:
• use workorders created at your host computer
• create workorders at the analyzer
• create an individual workorder
• create multiple workorders (batch)
• change an individual workorder
• change multiple workorders (batch)
• create a load list
• create a profile
• instruct the system to use system-assigned position numbers
• configure the Order Entry window
Sample Log window
Perform any of the following tasks at this window:
• view the sample log entries
The following information is provided for each sample log entry:
Asp Date and Time
External
Type
STT
Sample Id
Rerun
CTT
Description
Results
• search the sample log
• delete a specific sample log entry
• delete all sample log entries
• print a list of the sample log entries
• export the sample log entries
Test Result Monitor window
Use this window to monitor an analysis while it is running.
At the Test Result Monitor window, you can monitor the following:
• processing status
The center of the window resembles the sample tray. The outer ring is the STT tray; the
inner ring is the CTT tray. Each tray position is a circle.
As the run continues, the circles containing samples change color. The colors indicate
the current status of each sample. The color codes are displayed at the lower left of the
window.
NOTE: When running controls, please wait, there is a delay before the color coding
updates.