84 ADVIA 2400 Operator’s Guide
Using the Sample Log
1. At the Menu Panel, select Request, then select Sample Log.
2. Perform any of the following tasks at this window:
a. view the sample log entries
b. search the sample log
c. delete a specific sample log entry
d. delete all sample log entries
e. print a list of the sample log entries
f. export the sample log entries
3. Close the window.
Viewing the sample log entries
1. In the list box, select the file containing the sample log entries you want displayed.
The file for the current day is selected automatically.
2. Select the types of sample entries you want to display:
a. Select
ALL to view all sample entries.
b. Select
Routine/Ctl to view patient and control sample entries.
c. Select
Routine Only to view patient sample entries.
The following information is provided for each sample log entry:
sp Date and Time External Type
STT SampleID Rerun
CTT Description Results
3. To view entries for recently aspirated samples, select
Update.
Searching the sample log
1. Select the search condition(s) you want and enter the applicable information:
Sample ID: Enter the sample identification. Search is case sensitive (C0101 is not the
same as c0101).
Asp. Date: Enter the aspiration date using the format YYYYMMDD where YYYY
is the year (2006), MM is the month (01 to 12), and DD is the day (01 to 31).
Asp. Time: Enter the aspiration time using the format HH:MM:SS where HH is the
hour (00 to 24), MM are the minutes (00 to 60), and SS are the seconds (00 to 60).
You can enter an approximate aspiration time (for example, 14:00:00), but the time
entry must be complete (that is, 14:00 causes an error, it should be 14:00:00).
2. Select
Execute.
To Next Page
Loading...
