7SR210 Instrumentation Guide
Unrestricted Page 12 of 12 © 2018 Siemens Protection Devices Limited
1.12. Miscellaneous Meters
Instrument Description
--------------------
MISCELLANEOUS
> to view
--------------------
This is the sub-group that includes indication such as the relays time and date,
the amount of fault and waveform records stored in the relay TEST/RESET ►
allows access to this sub-group
Start Alarm
Count 0
Target 100
This meter displays the Start Alarm count.
Hrs In Service Time
Time 0Hrs
This meter displays the amount of time in service
Date 01/01/2000
Time 22:41:44
Waveform Recs 0
Fault Recs 0
This meter displays the Date, Time, the number of Waveform Records and
Fault Records stored in the relay.
Event Recs 0
Data Log Recs 0
Settings Group 1
This meter displays the number of Event Records, Data Log Records and the
Active Settings Group number stored in the relay.
1.13. Quick Logic Meters
Instrument Description
--------------------
> to view
--------------------
This is the sub-group that includes all the meters that are associated with
QuickLogic. TEST/RESET ► allows access to this sub-group
E 1-8 ---- ----
E 9-16 ---- ----
Shows the state of all the equations
E1 Equation
EQN =0
TMR 0-0 =0
CNT 0-1 =0
Shows the state of an individual equation. EQN shows the equation state. TMR
shows the timer progress and state for the equation. CNT shows the count
progress and state for the equation.
…
E16 Equation
EQN =0
TMR 0-0 =0
CNT 0-1 =0
Shows the state of an individual equation. EQN shows the equation state. TMR
shows the timer progress and state for the equation. CNT shows the count
progress and state for the equation.
To Next Page
Loading...
