Examination
Cassette Exposures in the Spotfilm Device (optional)
20 / 52 AXD3-340.620.13.01.02 Operator Manual
Serialography
Serialography selected: the LED lights up
◆ Select a segmentation program.
– Segmentation 2 on 1 / 3 on 1 / 4 on 1
If you now release the series and keep the exposure release button pressed, you
obtain an exposure series.
Bucky mode
Use only the light localizer and the operating elements of the primary collimator
for collimation.
Do not release fluoroscopy, otherwise Bucky mode is deselected.
◆ Press this key.
– Spotfilm device exposure technique is selected: the LED lights up
◆ Press this key.
– Bucky mode is selected: the LED lights up
◆ Insert a cassette and select a segmentation program.
Spotfilming without tomography
◆ Press this key.
– Spotfilm device exposure technique is selected: the LED lights up
◆ Select semi or fully automatic mode.
◆ Insert a cassette and select a segmentation program.
◆ Select single exposure or serialography.
Serialography in combination with tomography is not possible!
To Next Page
Loading...
