Accessories
Standard Accessories
AXIOM Iconos R200 AXD3-340.620.13.01.02 7 / 54
◆ Tighten both cap screws;
◆ Make sure that the handgrip strip is secure by pulling and pressing on it.
Removal ◆ Move the patient table to the horizontal position;
◆ Loosen both cap screws on the handgrip strip;
◆ Pull the handgrip strip out of the accessory rail.
We recommend placing the handgrip strip on the far side of the user.
Warning
The handgrip strip provides additional safety for the patient. To prevent injury to
the patient’s hands when moving the tabletop, make sure that the patient uses
the handgrip strip (not the cap screw) and does not hold onto the head end or
the side edge of the patient table.
If required, an additional handgrip strip for the front accessory rail can be ordered
via the Siemens Uptime Service (against payment).
To Next Page
Loading...
