Accessories
Standard Accessories
8 / 54 AXD3-340.620.13.01.02 Operator Manual
Handgrip
Application The handgrip can be mounted in the front or back accessory rail for stable and
secure patient positioning
Attachment ◆ Move the patient table to the horizontal position;
◆ Holding the base of the handgrip, loosen the handgrip (1);
◆ Slide the handgrip onto the edge of the accessory rail and move it into posi-
tion;
◆ Tighten the handgrip;
◆ Check that the handgrip is secure by pulling on it.
Removal ◆ Move the patient table into the horizontal position;
◆ Loosen the handgrip;
◆ Pull the handgrip out of the accessory rail.
1
Warning
The handgrip provides additional safety for the patient. To prevent injury to the
patient’s hands when moving the tabletop, make sure that the patient is using
the handgrip and not the head end or the side edge of the patient table.
To Next Page
Loading...
