Accessories
Optional Accessories
AXIOM Iconos R200 AXD3-340.620.13.01.02 31 / 54
Removal ◆ Move the patient table to the horizontal position.
◆ Assist the patient in stepping down from the patient table.
◆ Hold the rail for height adjustment.
◆ Loosen the cap screw (2).
◆ Lift the rail for height adjustment.
◆ Tighten the cap screw (2).
◆ Loosen the cap screw (1).
◆ Remove the cassette holder from the accessory rail.
Cassette holder without variable positioning
Application For lateral exposures with a second X-ray tube; to hold the cassette upright with
the tabletop in the horizontal position
For all cassette formats, horizontal and vertical.
Attachment ◆ Move the patient table to the horizontal position.
◆ Position the patient.
◆ Ensure that the patient is comfortable and stabilized.
Warning
Use this cassette holder only if the patient table will remain in the horizontal po-
sition throughout the entire examination procedure. The cassette holder will fall
if the patient table is tilted. Observance of this recommendation will prevent po-
tential injury to the patient or personnel as well as equipment damage.
To Next Page
Loading...
