Siemens AXIOM Iconos R200 - Armrest

Accessories
Optional Accessories
AXIOM Iconos R200 AXD3-340.620.13.01.02 35 / 54
Armrest
Application For securing the patient’s arm for injections, IV’s, or insertion of a catheter.
Attachment ◆ Move the patient table to the horizontal position.
◆ Position the patient.
◆ Open the clamping lever (1a).
◆ Place the armrest onto the front or rear accessory rail and slide it into position.
◆ Close the clamping lever (1b).
◆ Push and pull on the armrest to ensure it is seated properly.
◆ Loosen the cap screw (2).
◆ Move the padded armrest to a comfortable position.
◆ Tighten the cap screw (2).
◆ Ensure that the armrest is seated properly.
◆ Place the patient’s arm on the armrest.
(1a)
(1a)
(1b)
(2)