Accessories
Optional Accessories
38 / 54 AXD3-340.620.13.01.02 Operator Manual
Holder for BABIX cradles
Application For pediatric examinations using BABIX cradles with the patient table tilted or in
the vertical position
Attachment ◆ Move the patient table to the horizontal position;
◆ Slide the BABIX holder with the hook along the front or rear accessory rail to
the center of the patient table and move it to the exposure position;
◆ Tighten the cap screw;
◆ Pull and push the holder to ensure that it is seated properly;
Warning
Tighten the cap screw and ensure that it is secure. Remember that the BABIX
holder is the sole means of support for the hanging BABIX cradle. Securing the
cap screw properly ensures that the BABIX holder will not slide down the ac-
cessory rail, thereby avoiding injury to the patient and equipment damage.
To Next Page
Loading...
