System Overview
Operating and Display Elements
AXIOM Iconos R200 AXD3-340.620.13.01.02 35 / 44
Image intensifier formats
❏ Image intensifier full format
❏ Image intensifier zoom formats (zoom stages 1, 2, 3)
Collimator settings
❏ Coordinate switch for open/close
– Rectangular primary collimator
– Iris primary collimator
❏ Switch light localizer of the primary collimator on/off
LCD Monitor
Operating elements The buttons for adjusting the LCD monitor are located in the housing.
The necessary settings are made at start-up. No operation is required during op-
eration.
Power on/off The unit has a power switch on the bottom which you must operate only if the
LCD monitor is not switched through a system.
1
3
2
To Next Page
Loading...
