Siemens AXIOM Iconos R200 - Moving the X-Ray System Longitudinally

System Operation
System Settings
14 / 32 AXD3-340.620.13.01.02 Operator Manual
Moving the X-ray system longitudinally
The X-ray system consists of:
– Stand with tube assembly and primary collimator
– Image receptor unit with image intensifier and spotfilm device
System remote
control console
◆ Actuate the joystick.
– Deflect up/down: X-ray system moves headwards/footwards
Tableside control
panel
◆ Press a key.
– The X-ray system moves headwards/footwards
AXIOM
Use this operating element primarily during fluoroscopy.
The speed of the movement increases the further you deflect the joystick.
The movement takes place at constant speed.