System Operation
System Settings
AXIOM Iconos R200 AXD3-340.620.13.01.02 19 / 32
0° position of the table
You switch the automatic stop position of the table in the 0° position on or off
with this key.
– LED lights up: the table moves through the 0° position when tilting up/
down.
– LED does not light up: the table stops in the 0° position when tilting up/
down
With the “Stop in 0° position” function switched on, the movement stops even
if the tilting down/tilting up operating elements are operated in the 0° position.
You can continue the movement beyond the 0° position by letting go the operat-
ing element and activating it again.
Tilting the table up/down
System remote
control console
◆ Deflect the joystick to the left/right.
– The tabletop tilts down/up.
Tableside
control panel
◆ Press one of the keys.
– The tabletop tilts down/up.
AXIOM
To Next Page
Loading...
