System Operation
Setting the Image Geometry
28 / 32 AXD3-340.620.13.01.02 Operator Manual
Setting
System remote
control console
Rectangular collimation
◆ Actuate the coordinate switch
– Push up / to the left: height/width collimator blade pair opens
– Push down / to the right: height/width collimator blade pair closes
– Push diagonally: both collimator blade pairs open / close simultaneously.
Iris collimation ◆ Actuate the coordinate switch
– Push diagonally to the left above: collimator opens
– Push diagonally to the right below: collimator closes
Tableside
control panel
Rectangular collimation
◆ Press the keys
– Key above / on the left: width/height collimator blade pair opens
– Key below / on the right: width/height collimator blade pair closes
Iris collimation ◆ Press the keys
– Key on the left or above: collimator opens
– Key below or on the right: collimator closes
Semitransparent wedge filters (optional)
Operation is exclusively at the system remote control console or the optional mo-
bile tableside console.
Selection / deselection
◆ You select / deselect the wedge filters with one of the keys
– LED lights up: the wedge filter is selected and can now be moved with the
coordinate switch.
– LED does not light up: the wedge filter is deselected and remains standing
in the current position.
Left / right wedge filter
Double wedge filter
To Next Page
Loading...
