Memory en
13
BMemory
Memor y
The memory function allows you to save the setting for
a dish and call it up at any time.
The memory function is useful if you prepare one dish
particularly frequently.
Saving memory settings
Example: 360 W, 25 minutes
1. Touch i.
The indicator lamp above the field lights up.
2. Touch the microwave power setting you require.
1:00 min appears in the display and the indicator
lamp above the field lights up.
3. Set the cooking time using the control panel.
4. Press i to confirm.
The clock reappears. The setting has been saved.
Notes
■ You cannot save several microwave power settings
one after the other.
■ You cannot save automatic programmes.
■ You can save the memory settings and start the
appliance immediately. To finish, do not touch i,
touch "Start" instead.
■ To create a new memory setting: Touch "Start". The
old settings appear. Save the new programme as
described in steps 1-4.
Starting the memory
It is very easy to start the saved programme. Place your
meal in the appliance. Close the appliance door.
1. Touch i.
The saved settings are displayed.
2. Touch "Start".
The cooking time counts down in the display.
The cooking time has elapsed
An audible signal will sound. Open the appliance door
or press "Stop". The clock reappears.
Pausing the appliance
Touch the Stop button once or open the appliance
door. This pauses the appliance. The indicator above
the Stop button will light up.After closing the door, touch
the Start button again.
Cancelling the operation
Open the appliance door and press "Stop" once; or
press "Stop" twice.
PProgrammes
Pr ogr ammes
You can prepare food really easily using the various
programmes. You select a programme and enter the
weight of your food. The program then applies the most
suitable settings.
Note: You can choose from 8 programmes.
Setting a programme
Once you have selected a programme, make settings
as follows:
1. Touch g repeatedly until the required programme
number appears.
The indicator lamp above the field lights up.
2. Touch h.
A suggested weight appears in the display and the
indicator lamp above the field lights up.
3. Use the control panel to specify the weight of the
dish.
4. Touch "Start".
You will see the cooking time for the programme
counting down.
The cooking time has elapsed
An audible signal will sound. Open the appliance door
or press "Stop". The clock reappears.
Correction
Touch "Stop" twice and reset.
J
VWRS
VWDUW
PLQ
NJ
PLQ
PLQ
PLQ
NJ
NJ
J
VWRS
VWDUW
VWRS
VWDUW
NJ
NJ
J
VWRS
VWDUW
To Next Page
Loading...
