en Basic settings
18
QBasic settings
Ba s i c set t i ngs
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
Changing settings
1. Press the on/off button.
2. Press the menu button.
The operating modes menu opens.
3. Use the rotary selector to select "Settings".
4. Touch the ¿ arrow.
5. Use the rotary selector to change the values.
6. Use the arrow ¿ to switch to the next settings, and
change them if necessary.
7. Press the menu button to save.
"Save" or "Discard" appears on the display.
8. Use the touch fields to select which option you
require.
List of settings
This list tells you all the basic settings and how to
change them. Depending on the model of the appliance
you own, the display will show only those settings that
apply to your appliance.
You can change the following settings:
Note: Changes to the language, button tone and
display brightness settings take effect immediately. All
other changes take effect after the settings have been
saved.
--------
Power cut
The changes you make to the settings are retained
even after a power cut.
Only the settings pertaining to the initial use of the
appliance need to be implemented once again
following a power cut.
Changing the time
You can change the time in the basic settings.
For example: Changing from summer to winter time.
1. Press the On/Off button.
2. Press the Menu button.
3. Use the rotary selector to select "Settings".
4. Touch the arrow ¿ to move to "Time of day".
5. Use the rotary selector to change the time.
6. Press the Menu button.
Save or Discard appears in the display.
Setting Options
Language Set the language
Clock Set the current time
Date Sets the current date
Audible signal Short cooking time
Medium cooking time*
Long cooking time
Button tone Switched on
Switched off*
(Button tone at on/off always on)
Display brightness Scale with 5levels
Level 3*
Clock display Digital + date*
Digital
Off
Night-time dimming Switched off**
Switched on (Display dimmed between
22:00and 6:00)
Demo mode Switched off*
Switched on
(only displayed during the first 3minutes
after the appliance has been reset or is
used for the first time)
Factory settings Reset
Do not reset*
* Factory setting (factory settings may vary depending on the appli-
ance model)
Cleaning en
19
DCleaning
Cl eani ng
With good care and cleaning, your appliance will retain
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.
:Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
:Warning – Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
:Warning – Risk of injury!
Scratched glass in the appliance door may develop into
a crack. Do not use a glass scraper, sharp or abrasive
cleaning aids or detergents.
Note: Unpleasant odours, for example after fish has
been prepared, can be removed very easily. Add a few
drops of lemon juice to a cup of water. Always place a
spoon in the container to prevent delayed boiling. Heat
the water for 1to 2minutes at maximum microwave
output.
Cleaning agent
To ensure that the different surfaces are not damaged
by using the wrong cleaning agent, observe the
information in the table.
Do not use:
■ Harsh or abrasive cleaning agents.
■ Metal or glass scrapers to clean the door panels.
■ Metal or glass scrapers to clean the door seal.
■ Hard scouring pads or sponges.
■ Cleaning agents with a high alcohol content.
Wash new sponge cloths thoroughly before use.
Area Cleaning agent
Appliance front Hot soapy water: Clean using a dish cloth and
then dry with a soft cloth. Do not use a metal or
glass scraper for cleaning.
Display Wipe down using a microfibre cloth or a
slightly damp cloth. Do not wipe with a wet
cloth.
Stainless steel Hot soapy water: Clean using a dish cloth and
then dry with a soft cloth. Remove flecks of
limescale, grease, starch and albumin (e.g.
egg white) immediately. Corrosion can form
under such flecks. Special stainless-steel
cleaning agents are available from the after-
sales service or from specialist retailers.
Cooking compart-
ment made of stain-
less steel
Hot soapy water or vinegar solution: Clean
using a dish cloth and then dry with a soft
cloth. Do not use oven spray or any other
aggressive oven cleaners or abrasive materi-
als. Scouring pads, rough sponges and pan
cleaners are also unsuitable. These items
scratch the surface. Allow the interior surfaces
to dry thoroughly.
Door panels Glass cleaner: Clean with a dish cloth. Do not
use a glass scraper.
Door seal
Do not remove.
Hot soapy water: Clean with a dish cloth and
do not scour. Do not use a metal or glass
scraper for cleaning.
Accessories Hot soapy water: Soak and clean with a dish
cloth or brush.
To Next Page
Loading...
